cyberpolt.blogg.se - Hexagonal shelving

Repeat on each side until you have completed your first hexagon.

Once holes are drilled secure your screws in place.

Measure your two screw holes and pre-drill them to prevent cracking.

Press together firmly together and hold for a few seconds.

Once constructed use your wood glue to carefully secure each piece to each other.

Keep the pieces facing upwards on their sides. Shape the pieces together to make a hexagon shape it will be like a puzzle at first.

You will need 6 pieces for your first honeycomb.

When all pieces are cut and equal you can assemble your first honeycomb.

Repeat this until you have 15 equally cut pieces.

One side should be a long side measuring 12 inches and the other a shorter side with inward facing angles. Once done you will be left with a plank piece with two inward facing angles (pyramid like). Mark your spot and cut another 30-degree angle.

Turn your plank over and measure 12 inches (30.48 cm) from the one end.

If your fencing plank has a decorative end cut the end off at a 30-degree angle.

To start set your miter saw to cut at a 30-degree angle.

3 x Fencing planks (As level as possible) (Use pre-stained wood).

I am more than happy to help, and I will do my best to work with you to figure out a solution! PLEASE BE POLITE, NO HARASSMENT OR RUDE MESSAGES WILL BE TOLERATED. ***If you have any issues at all with your order, please do not hesitate to reach out. If you would like to cancel your order, please notify us within 24 hours of purchase. If your order arrives damaged from shipping, please notify us within 48 hours of receiving your damaged shipment. Therefore, unfortunately we do not accept any returns for any of the items we offer. Also, stains will be similar to, but can vary slightly from photos shown*Įach of the items in our shop are made to order. *please note that each shelf will have different knots and character, so no 2 shelves will look exactly the same. *Hexagons in the listing photos are stained provincial* Please select the stain colour of your choice. Once you have assembled the first shelf, proceed to mount the remaining shelves in the design of your choice in the same way. Then simply hang the ledge of the wooden shelf from the nail on the wall. Once you have decided how you would like to design your shelves on your wall, hammer a nail (or 2) in the spot you want, and leave at least 1" of the nail sticking out of the wall. These shelves are packaged individually, so they come as a set of 6 shelves that can be assembled in whatever design you choose! If constructed as shown in the first photo, the design measures approximately 61.5” wide and 26” tall from the tallest point to the lowest point. The dimensions of each of the 6 shelves are 13”x15”x3.5” deep.

We added the biscuit joints for additional stability as most other hexagons are only secured with wood glue and nails. They are joined with biscuit joints, as well as nails and wood glue for maximum strength. These hexagons are built extremely secure. If you’d like any inner shelves added, you can add extras using this link! you can use 1 or 2 for each hexagon, depending on how heavy the items are that are sitting on them (see instructions below) This set of 6 hexagons is the perfect wall accent for any room.